Table of Contents
Advertisement
Petrol Pressure Washer
Instruction Manual
WARNING!
Protect yourself and others by observing all safety
information, warnings and cautions. Failure to comply
with instructions could result in personal injury and/or
damage to product or property.
Please retain instructions for future reference!
Hotline: 1300 418 640
Monday/Friday: 9.00am to 4.30pm
Saturday: 9.00am to 3.00pm
Email: service@actionspares.com.au
Model: YF3003
Advertisement
Table of Contents
Related Manuals for Yard force YF3003
Summary of Contents for Yard force YF3003
- Page 1 Model: YF3003 Petrol Pressure Washer Instruction Manual WARNING! Protect yourself and others by observing all safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference! Hotline: 1300 418 640 Monday/Friday: 9.00am to 4.30pm...
- Page 2 Read this manual carefully prior to assembling and operating the pressure washer. It is dangerous to operate this product without being familiar with these instructions. Keep this manual in a safe place and have it ready for future reference.
- Page 3 Fig. 1 Fig. 5 Fig. 3 Fig. 2 Fig. 5 Fig. 4...
- Page 4 Fig. 7 Fig. 6 Fig. 9 Fig. 8 Fig. 10...
- Page 5 Fig. 11...
-
Page 6: Table Of Contents
YF3003 CONTENTS Description of Symbols............………....………07 General Safety Instructions.....................08 Description of Product Parts...................14 Intended Use........................14 Assembly...........................14 Operation...........................15 Application........................20 Maintenance........................21 Troubleshooting.......................24 Warranty………………………………………………………………………….......25... -
Page 7: Description Of Symbols
DESCRIPTION OF SYMBOLS Read this manual carefully and become familiar with your pressure washer. Know its applications, its limitations and any hazards involved. Every effort has been made to ensure that information in this manual is accurate and current. However, producer reserves the right to change, alter or otherwise improve the product and this document at any time without prior notice. -
Page 8: General Safety Instructions
DESCRIPTION OF SYMBOLS Fuel valve lever operation. Fuel valve is open in the “ON” position and closed in the “OFF” position. Check that there is not any fuel spilling or fuel leakage before starting the engine. Dispose appliances according to the regulation and requirement of local council. - Page 9 GENERAL SAFETY INSTRUCTIONS SAFETY WHILE REFUELLING 1. FUEL OUTDOORS. Fill fuel tank outdoors – never indoors. Fuel vapours can ignite if they collect inside an enclosure. Explosion can result. 2. USE APPROVED CONTAINER. Never pump fuel directly into fuel tank at service station.
- Page 10 GENERAL SAFETY INSTRUCTIONS 4. DO NOT RUN PRESSURE WASHER WHILE UNATTENDED. The operation of the pressure washer should always be monitored to ensure safe operation. 5. FOLLOW INSTRUCTIONS FOR SAFETY WHEN REFUELING THE ENGINE. Fuel is flammable and can explode. Always use caution when handling fuel. 6.
- Page 11 GENERAL SAFETY INSTRUCTIONS 6. HIGH PRESSURE CLEANERS SHALL NOT BE USED BY CHILDREN OR UNTRAINED PERSONNEL. 7. HIGH PRESSURE HOSES, FITTINGS AND COUPLINGS ARE IMPORTANT FOR THE SAFETY OF THE PRESSURE WASHER. Use only hoses, fittings and couplings recommended by the manufacturer. 8.
- Page 12 GENERAL SAFETY INSTRUCTIONS 2. ALWAYS ENGAGE THE TRIGGER LOCK WHEN NOT ACTUALLY SPRAYING. This will reduce the risk of unintended spraying. 3. KEEP OPERATING AREA CLEAR OF ALL PERSONS. Do not use the pressure washer within range of persons. 4. DO NOT DIRECT THE JET AGAINST YOURSELF OR OTHERS IN ORDER TO CLEAN CLOTHES OR FOOTWEAR.
- Page 13 GENERAL SAFETY INSTRUCTIONS 21. DO NOT RETROFIT OR MAKE ANY UNAUTHORISED CHANGES TO THE PRESSURE WASHER, OR USE UNAPPROVED PARTS. 22. USE ONLY HOSES, FITTINGS AND COUPLINGS SUPPLIED AND RECOMMENDED BY THE MANUFACTURER. 23. NEVER PULL OR CARRY THE PRESSURE WASHER BY THE HOSES. 24.
-
Page 14: Description Of Product Parts
DESCRIPTION OF PRODUCT PARTS DESCRIPTION OF PRODUCT PARTS Parts list As shown in Fig 10 0°tip 、 25°tip 、 40°tip 、 Soap tip Handle Locking/releasing pin Gun / hose holder Soap bottles High pressure water outlet Water inlet High pressure hose Spray gun 10. -
Page 15: Operation
ASSEMBLY To fold the handle, pull the Locking/releasing pin outward on the right side of the machine, and turn the handle downward to fold the handle. Add Engine Oil IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure. - Page 16 OPERATION – Check it for visual defects. – Check that all parts of the machine have been securely fitted. – Check if the water connector and the high-pressure pipes are tight. Starting and stopping Note: put the high pressure washer on a smooth ground. Stand in a secure and stable position. Starting: 1.
- Page 17 OPERATION Oil level check Check method: 1) Remove the dipstick and clean it. 2) Reinsert the dipstick into the oil filling hole without screwing it, and check oil level 3) If the oil level is too low, add the recommended engine oil up to the oil filling neck. 4) Reinstall the dipstick.
- Page 18 OPERATION c. STARTING THE ENGINE 1. Turn the fuel cock to the “ON” (OPEN) position. 2. Turn the choke lever to the “CLOSE” (OFF) position. If the gasoline engine is hot, don’t close the choke.
- Page 19 OPERATION 3. Start the engine Recoil starter: Turn the engine switch on the “ON” (OPEN) position. Pull the starter grip lightly until resistance is felt, then briskly NOTICE Don’t allow the starter grip to snap back against the engine. Return it gently to prevent Damage to the starter.
-
Page 20: Application
OPERATION ENGINE OIL ALARM The engine oil alarm is designed to function when the engine oil in the Crankcase is insufficient. Lack of engine oil may damage the engine. Once oil level in the crankcase is too low, the engine oil alarm will stall the engine automatically to make it free of damage while the engine switch is still at “ON”. -
Page 21: Maintenance
APPLICATION Engine R210-S Working Pressure 2400 psi Max Pressure 2800 psi Working Flow 540 L/H Max Flow 620 L/H Displacement 209 cc Max Power 7.0 hp Pump Detergent 1.6 L Water Supply Not to Exceed 40°C Temperature Thermal Protector act when water reaches 52°-68°C Shipping Weight 29.5 kg MAINTENANCE... - Page 22 MAINTENANCE WARNING! NEVER repair a high pressure hose. Replace it with another hose that exceeds the maximum pressure rating of your pressure washer. Check Chemical Injection Hose. Examine the filter on the detergent tube and clean if clogged. The tube should fit tightly on the barbed fitting.
- Page 23 MAINTENANCE IMPORTANT: Simply shutting OFF engine will not release pressure in the system. When the engine has shut down, squeeze the trigger on the spray gun to relieve the pressure in the hose. ENGINE MAINTENANCE See the engine owner’s manual for instructions on how to properly maintain the engine. CAUTION! Avoid prolonging or repeating skin contact with used motor oil.
-
Page 24: Troubleshooting
TROUBLESHOOTING Problem Cause Correction 1. Nozzle tip not attached. 1. Attached required nozzle tip 2. Water inlet is blocked. 2. Clear inlet. 3. Inadequate water supply. 3. Provide adequate water flow. 4. Inlet hose is kinked or leaking. 4. Straighten inlet hose, patch leak. 5. -
Page 25: Warranty
WARRANTY WARRANTY This product is covered by a 1 year parts and labour warrant against manufacturing defects. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reason- ably foreseeable loss or damage.