Related Manuals for Yard force LU C10
Summary of Contents for Yard force LU C10
- Page 1 LU C10 ASYWS0110020 20V CORDLESS PATIO WEEDER Original Instructions +44(0)1904 727513 support@yardforce.co.uk www.yardforce.eu...
- Page 2 Read this manual carefully prior to assembling and operating the Patio Weeder. It is dangerous to operate this product without being familiar with these instructions. Keep this manual in a safe place and have it ready for future reference.
-
Page 6: Table Of Contents
LU C10 Original Instructions CONTENT Intended use General safety warnings Symbols Technical data Description of product Installation & Operation Maintenance and storage Troubleshooting Warranty CE declaration... -
Page 7: Intended Use
INTENDED USE The product is intended to clean the gap or edge of outdoor surfaces such as patio stones, wood, or composite material. For safety reasons it is essential to read the entire instruction manual before first operation and to observe all the instructions therein. This product is intended for private domestic use only, not for any commercial trade use. - Page 8 GENERAL SAFETY WARNINGS footwear is recommended when working outdoors. 7. Avoid accidental starting – Do not carry the patio weeder with your finger on the switch. CAUTION! Moving parts will continue to run for several seconds after turning off the machine. 8.
- Page 9 GENERAL SAFETY WARNINGS recommendations described in the maintenance section of this manual. 15. Avoid dangerous environments – Do not use the patio weeder in rain or in damp or wet locations. Do not operate in gaseous or explosive atmospheres or use near flammable or combustible liquids.
- Page 10 GENERAL SAFETY WARNINGS • Always observe the surface conditions in order to avoid slipping, falling, and unexpected objects. Preparation • Always inspect the area where the patio weeder is to be used. Remove all objects (i.e. stones, sticks, wires, and other foreign materials) that could cause the operator to trip.
- Page 11 GENERAL SAFETY WARNINGS footing and keep a firm hold on the grips. Walk; don't run! • Do not operate the patio weeder on slippery surfaces. Check your footing during use. • Exercise caution when changing direction and operating the tool on slopes. Always keep feet and legs a safe distance away from the machine.
- Page 12 GENERAL SAFETY WARNINGS of debris around the brush could impair performance or damage the motor. Inspect and clean the area around the brush before every use. ii) Safety devices are operating properly – Do not tamper with or adjust safety devices. iii) Bolts and screws are properly tightened –...
- Page 13 GENERAL SAFETY WARNINGS IMPORTANT! Analysis confirms that incorrect use and poor care of high-performance batteries are the main factors responsible for personal and/or product damage. WARNING! Use only approved replacement batteries; other batteries may damage the cordless patio weeder and cause it to malfunction, which can lead to serious personal injury.
- Page 14 GENERAL SAFETY WARNINGS • Maintain charger cord – When unplugging the charger, pull the plug, not the cord, from the receptacle to reduce the risk of damage to the electrical plug and cord. Never carry the charger by its cord or yank it by the cord to disconnect it from the power source.
- Page 15 GENERAL SAFETY WARNINGS • Do not burn or incinerate battery packs – Battery packs may explode, causing personal injury or damage. Toxic fumes and materials are created when battery packs are burned. • Do not crush, drop or damage battery packs – Do not use the battery pack or charger if they have sustained a sharp blow, been dropped, run over or have been damaged in any way (i.e.
- Page 16 GENERAL SAFETY WARNINGS Information about the battery 1. The battery pack supplied with your cordless patio weeder is only partially charged. The battery pack has to be charged completely before you use the tool for the first time. 2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently.
- Page 17 GENERAL SAFETY WARNINGS overheating is not apparent externally. 9. Avoid damage and shocks. Immediately replace batteries that have been dropped from a height of more than one meter or those that have been exposed to violent shocks, even if the housing of the battery pack appears to be undamaged.
- Page 18 GENERAL SAFETY WARNINGS 3. Keep the battery charger, battery pack(s) and the cordless tool out of the reach of children. 4. Do not use the supplied battery charger to charge other cordless tools. 5. Do not overcharge batteries. Do not exceed the maximum charging times.
- Page 19 GENERAL SAFETY WARNINGS (10-40°C). 5. Do not keep the battery charger in places where the temperature is liable to reach over 104°F (40°C). In particular, do not leave the battery charger in a car that is parked in the sunshine. 6.
-
Page 20: Symbols
SYMBOLS Safety symbols The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them require your careful attention and full understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures. - Page 21 SYMBOLS Please read all of the safety and operating instructions carefully before using this machine. Read the instruction manual before operating. WARNING! Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury. Do not use this tool in the rain. Avoid using it in damp conditions.
- Page 22 SYMBOLS Symbol On Battery Pack To reduce the risk of injury, user must read instruction manual carefully. Do not throw into water. Do not throw on fire. Do not subject the battery to strong sunlight over long periods of time. Do not leave on a heater (max.45°C).
- Page 23 SYMBOLS Symbol On Battery Pack To reduce the risk of injury, user must read instruction manual carefully. The charger is for indoor use only. Double insulation T3.15A Protective 3.15 A limited WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
-
Page 24: Technical Data
TECHNICAL DATA Model LU C10 Voltage 20V d.c. Battery capacity 2.0 Ah No load speed 1200 rpm Brush size 100 mm Measured sound pressure level(LpA) 70.4 dB(A) K=3.0 dB(A) Measured sound power level(LwA) 82.1 dB(A) K=3.0 dB(A) Net weight 2.2 kg Vibrations 0.79 m/s²... -
Page 25: Description Of Product
DESCRIPTION OF PRODUCT Parts description (Fig. A) Battery pack Spanner lever Wheel Brush wheel Height adjusting knob Auxiliary handle Switch trigger Safety button Delivery contents (Fig. B) Carefully unpack the appliance and check that it is complete. Dispose of the packaging material correctly. -
Page 26: Installation & Operation
INSTALLATION Connecting the patio weeder head with the shaft (Fig. C&D) 1. Unlock the spanner lever on the telescopic shaft. 2. Connect the working head with the telescopic shaft. 3. Lock the spanner lever. OPERATION Charging the battery pack (Fig. E) NOTE: Remove the battery pack from the charger after it has been fully charged. - Page 27 OPERATION Adjust the height of the tool (Fig. H) 1. Loosen the lower half of the knob located in the middle of aluminum shaft by turning it anti- clockwise. 2. Pull the lower shaft up or down to adjust the desired height. 3.
-
Page 28: Maintenance And Storage
MAINTENANCE AND STORAGE WARNING : Before performing any repair work, always remove the battery pack . Cleaning 1. Do not spray the unit with water. Water ingress may destroy the battery pack and the electric motor. 2. Clean the unit with a cloth, hand brush, etc. 3. - Page 29 MAINTENANCE AND STORAGE Maintenance 1. Keep all nuts, bolts and screws tight to be sure that the machine is in safe working condition. 2. Examine the machine and replace worn or damaged parts for safety 3. Check that the guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs before using.
-
Page 30: Troubleshooting
TROUBLESHOOTING WARNING! Before performing any repair work, always remove the battery pack. Improper repairs can result in the product functioning unsafely. This endangers yourself and your environment. Faults which cannot be rectified with the aid of following table may be rectified by a specialist company only (customer service center). -
Page 31: Warranty
WARRANTY Yard Force Warranty Statement. All Yard Force products are covered by a standard two-year warranty which can be extended to three years if the product is registered online within 28 days of purchase. If you do not register your product within 28 days of purchase, the two-year warranty will apply. -
Page 32: Ce Declaration
Unit A&B Escrick Business Park Escrick, York YO19 6 FD Declare that the product: Description: 20V Cordless Patio Weeder Model No. LU C10/ ASYWS0110020 Function: Sweep the gap of wood or stone Complies with the essential health and safety requirements of the...