Table of Contents
Advertisement
Appendix – X2- (AUX) Connector Pin Order
Output signals from the X2 socket can only be sent to other systems with a maximum of 25V (AC)
or 60V (DC) where both poles are disconnected from the mains. Maximum simultaneous load is
100 mA.
From left to right:
Pin 1
Common return
Pin 2
Normally Open (NO) send
Pin 3
Normally Closed (NC) send
Pin 4
Low Battery send (NC)
Pin 5
Not in use, do not connect
Pin 6
Not in use, do not connect
Pin 7
Not in use, do not connect
Pin 8
Not in use, do not connect
27
Advertisement
Table of Contents
