Change Batteries; Cleaning - Abilia Emfit 464000 User Manual

5.2. Change batteries

NOTE:
Do not use any rechargeable batteries or lithium-ion batteries.
Unplug the power supply to test the batteries. When it is time to replace the batteries, the red LED
starts flashing slowly. The device makes a beep sound every 1.5 hour and X2 notifies every three
hours.
1. Disconnect the power
supply and all cables.
2. Open the lid by lifting the
side.
Estimated battery life is 6 months when using high quality alkaline batteries with 2800 mAh
capacity (2 pcs). Estimation is based on the device being on 50% of time (shut down 50% of time)
and of that 50% of time there is someone in bed 75% of that time, there are two notifications per
day and sound notification is on 30 seconds each time.

5.3. Cleaning

NOTE:
• Do not let the device get wet.
• Unplug the power supply before cleaning
Always disconnect the external power supply and remove nurse call cable (if used) from connector
X2 before cleaning the device. You can wipe the bed sensor and cables, control unit and external
power supply with a damp cloth, neutral cleaning product or mild disinfectant. Dry all parts well
after cleaning.
19
3. Lift the old batteries at the
positive terminal (+) and
remove them.
4. Insert two 1.5 V AA alkaline
batteries. Make sure that the
poles are placed correctly
according to the marking.