3.4. Connect the sensor, power supply and external systems
NOTE:
The notification sound may be absent if the sensor or its cable is incorrectly positioned or
•
damaged.
•
The sensor or the sensor cable must not be stretched or cut.
Connect the bed sensor, power supply (if used), and any cables to external systems (such as
forwarding to nurse call systems or forwarding systems).
1. Connect the cable from
the Emfit bed sensor to the
X3 socket.
For a description of the X2 socket pin order, see Appendix – X2- (AUX) Connector Pin Order on
page 27.
11
2. Connect the cable to the
external system in the X2
socket.
3. Connect the power supply
(if selected) to the X1 socket.