(3) An execution confirmation dialog box appears. Confirm that there is no problem and click
Yes. Next, the Restart Unit Dialog Box is displayed. Select Return to out-of-box
configuration, and then emulate cycling power and click OK.
An execution completion dialog box appears. Confirm the information and click OK.
8.1.2.
CPU Unit
To initialize the CPU Unit, select Clear All Memory Areas from the PLC Menu in the
CX-Programmer. In the Confirm All Memory Clear Dialog Box, select Initialize and click
OK.
8.2. Initializing the Code Reader
For information on initializing the code reader, please refer to How to initialize the settings? in
Q&A in Appendices of the MicroHAWK V320-F/V330-F/V420-F/V430-F Series Barcode
Reader User Manual (Cat. No. Z432).
8. Initializing the System
49