8. Initializing the System
In this document, it is assumed that the controller and the code reader uses the factory default
settings.
If you change their settings from the default, you may not be able to perform various setting
procedures as described.
8.1. Initializing the PLC
To initialize the controller, you must initialize the CPU Unit and EtherNet/IP Unit. Please put
the PLC in PROGRAM mode before initialization.
8.1.1.
EtherNet/IP Unit
(1) In the CX-Programmer, select Edit – I/O Table and Unit Setup from the PLC Menu.
In the PLC IO Table Window, right-click on the EtherNet/IP Unit and select Unit Setup
from the menu.
(2) In the Edit Parameters Dialog Box, click Restart.
8. Initializing the System
48