Omron V330-F Series Connection Manual page 28
Auto focus multi code reader
Hide thumbs
Also See for V330-F Series:
- Connection manual (82 pages) ,
- Quick start manual (72 pages) ,
- Network connection manual (46 pages)
Table of Contents
Advertisement
In the PLC IO Table Window,
5
click on + to the left of Built-in
Port/Inner Board. CJ1W-EIP21
is shown.
* The figure on the right is the
CPU Unit (built-in EtherNet/IP
port) shown in 5.2. Device
Configuration. If using other
available EtherNet/IP units,
the display position and the
name will be different.
Right-click on CJ1W-EIP21 and
select Unit Setup from the
menu.
6
The Edit Parameters Dialog
Box is displayed. Select the
TCP/IP Tab Page.
In IP Address, set the items as
follows.
• Use the following address:
Selected
• IP Address: 192.168.188.1
• Subnet mask: 255.255.255.0
Click Transfer [PC to Unit].
7. EtherNet/IP Connection Procedure
27
Advertisement
Table of Contents
