Ecowood TROLLEY Installation, User’s And Maintenance Handbook page 19

TROLLEY
UK
2. Press ON/OFF to set the automatic ON/OFF cycles for the stove.
3. Display "D" will show the number for the day that is to be programmed or modified: (e.g.
1=Monday; 2=Tuesday; 7=Sunday). Press the + button to select the day you want to pro-
gramme.
After selecting the day, press the ON/OFF button to continue programming the times when the
stove will be switched on and off.
When the red LED is lit this means you are programming when the stove is to be switched on.
Set the automatic switch-on time using the same procedure as given in the section on "Setting
the date and time".
4. After completing programming for switch-on time, press the ON/OFF button to go on to pro-
gramme the time when the stove will be switched off.The green LED will come on to indicate
that you are programming when the stove is to be switched off.
Set the automatic switch-off time using the same procedure as given in the section on "Setting
the date and time".
5. Press the ON/OFF button to enter and confirm the cycle settings you have just made.
It is possible to programme up to 4 automatic ON/OFF cycles per day; the yellow LED's indi-
cate which cycles have been programmed.
It is not possible to switch ON or OFF at 00:00.
6. To exit programming of the ON cycles, press the MAN/AUTO button while the first number on
the left in the "H" display is flashing.
7. To completely exit programming, press the ON/OFF button and then the MAN/AUTO button im-
mediately afterwards.
PROGRAMMING WITH THE REMOTE CONTROL:
Follow the same procedures as described above.
36
ADVANCED PROGRAMMING INSTRUCTIONS
only to be carried out by technical staff
To enter advanced programming mode in order to modify the factory settings start by
pressing MAN/AUTO followed by the + button, then release them simultaneously.
The red light will come on to show you are adjusting pellet loading rate.
The letter A will appear to show that you can modify pellet loading rate at the ignition
stage.The setting (positioned in the centre of the scale) is shown on the display by the yel-
low LED's.
Use the + and - buttons to change the values.The ON/OFF button is used to confirm the
change and to change the sector for which the preset loading rate is to be modified.
After the letter A the pellet loading rates will appear in sequence 1-2-3-4-5, while the num-
ber 6 indicates the working time of the motor reducer.
At the end of this sequence the red light will go off and at the same time the green light will
go on to show that you are about to adjust the exhaust flue exhauster motor parameters,
then the following will appear in sequence: the letter A (ignition) and subsequently by press-
ing the ON/OFF button, the corresponding loading power levels to be changed 1-2-3-4.
Finally the letter P will appear to indicate that you have entered the grate cleaning stage,
where also here it is possible to change the cleaning intervals.
To exit programming mode press the ON/OFF button, the new selected parameters will be
entered automatically and the time will re-appear on the clock.
This programming can be carried out while the stove is working so that it is possible to
monitor the effects of the changes immediately.
Table of values for the TROLLEY series of stoves
Red Light value of setting
PELLET Acc. 450g.
PELLET 1a p. 450g.
PELLET 2a p.. 600g.
PELLET 3a p. 900g.
PELLET 4a p. 1100g.
PELLET 5a p. 1350g.
PELLET 6a Time 1,25"
Green Light value of setting
Exhauster Acc. 185V.
Exhauster 1a 185V.
Exhauster 2a 185V.
Exhauster 3a. 185V.
Exhauster 4a 185V.
Hearth cleaning 20 Min.
N.B. It is possible to display and modify the pellet loading rate setting for programmed ig-
nition by simply pressing the + and - buttons on the display, with the stove switched off.
TROLLEY
500g. 550g. 600g.
500g. 550g. 600g.
650g. 700g. 750g.
950g. 1000g. 1050g.
1150g. 1200g. 1250g.
1400g. 1450g. 1500g.
1,50" 1,75". 2,00"
205V. 210V. 220V.
205V. 210V. 220V.
205V. 210V. 220V.
205V. 210V. 220V.
205V. 210V. 220V.
30 Min. 40 Min. 50 Min.
UK
650g.
650g.
800g.
1100g.
1300g.
1550g.
2,25"
230V.
230V.
230V.
230V.
230V.
60 Min.
37