NordicTrack COMMERCIAL X22i User Manual page 15

14. Orient the crossbar assembly (R) as shown.
Attach the crossbar assembly to the left and right
handrail assemblies (P, Q) with four 1/4" x 3/4"
Screws (5); start all four Screws, and then
tighten them.
Then, tighten the four indicated 3/8" x 2 1/4"
Screws (1).
15. Tip: It may be helpful to use a short phillips
screwdriver for this step.
Identify the Left Handrail Cover (110). Attach the
Left Handrail Cover to the left handrail assembly
(P) with four #8 x 3/4" Screws (2); start all four
Screws, and then tighten them. Be careful not
to overtighten the Screws.
Attach the Right Handrail Cover (not shown)
to the right side in the same way.
14
R
5
1
P
15
110
2
15
5
1
Q
2
2
P
2