Luminaire led SWP610 Installation Manual

INSTALLATION GUIDE FOR

SWP610 and SWP1212 LED

SAFETY PRECAUTIONS

WARNING - Risk of fire or electric shock. Basic safety precautions should always be

followed when using electrical equipment.

WARNING - This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and operation of the

product and the hazards involved.

WARNING - Disconnect power to all circuits before wiring fixture.

WARNING - Install in accordance with all national, state, and local codes.

WARNING - Do not connect to an ungrounded supply.

WARNING - Read all fixture markings and labels to ensure correct installation of

fixture.

RETAIN THESE INSTRUCTION FOR FUTURE USE

One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) |

www.luminaireled.net

Page 1 of 3

Table of Contents

Do you have a question about the SWP610 and is the answer not in the manual?

Page 1 INSTALLATION GUIDE FOR SWP610 and SWP1212 LED SAFETY PRECAUTIONS WARNING - Risk of fire or electric shock. Basic safety precautions should always be followed when using electrical equipment. WARNING - This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Page 2 INSTALLATION GUIDE FOR SWP610 and SWP1212 LED CAN ICES-005 (A) / NMB-005 (A) FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3 INSTALLATION GUIDE FOR SWP610 and SWP1212 LED Lens Base Plate INSTALLATION PROCEDURE WARNING - The main (white LED) circuit and the auxiliary circuit (Nightlight) are to be wired to separate circuits that can’t be powered on simultaneously. 1. Remove Luminaire from carton and check for damage.

Swp1212