Luminaire led VPF4 Series Installation Manual

W/ corner bracket

Advertisement

VPF4, VPF8, VPF12 Series w/ Corner Bracket
Installation Guide

SAFETY PRECAUTIONS

WARNING - Risk of fire or electric shock. Basic safety precautions should always be
followed when using electrical equipment.
WARNING - This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the
product and the hazards involved.
WARNING - Disconnect power to all circuits before wiring fixture.
WARNING - Install in accordance with all national, state, and local codes.
WARNING - The main (white LED) circuit and the auxiliary circuit (Nightlight) are to
be wired to separate circuits that can't be powered on simultaneously.
WARNING - Do not connect to an ungrounded supply.
WARNING - Read all fixture markings and labels to ensure correct installation of
fixture.
WARNING – Do not apply power to the fixture until the LED Board assembly is
connected to the driver. If power is applied to the fixture prior to connecting the LED
Board assembly to the driver, this will cause the LED Board to fail and void the
warranty.
RETAIN THESE INSTRUCTION FOR FUTURE USE
One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) |
www.luminaireled.net
| © 2020 Acuity Brands Lighting, Inc. All rights reserved.
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPF4 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Luminaire led VPF4 Series

  • Page 1 VPF4, VPF8, VPF12 Series w/ Corner Bracket Installation Guide SAFETY PRECAUTIONS WARNING - Risk of fire or electric shock. Basic safety precautions should always be followed when using electrical equipment. WARNING - This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • Page 2 VPF4, VPF8, VPF12 Series w/ Corner Bracket Installation Guide CAN ICES-005 (A) / NMB-005 (A) FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 VPF4, VPF8, VPF12 Series w/ Corner Bracket Installation Guide INSTALLATION INSTRUCTIONS WARNING (VPF8, VPF12)- The main (white LED) circuit and the auxiliary circuit (Nightlight) are to be wired to separate circuits that can’t be powered on simultaneously. Remove Corner Bracket from carton and check for damage Mount fixture to surface using holes provided.
  • Page 4 VPF4, VPF8, VPF12 Series w/ Corner Bracket Installation Guide Lens Clamp Remove Luminaire from carton and check for damage Remove Lens Clamps via (4) 8-32 screws Remove Lens via 8-32 screw. Remove reflector by loosening (2) ¼ hex screws. Mount fixture to corner bracket using (4) ¼ bolts/screws (not included). Connect all supply wires in accordance with national and local electrical codes.

This manual is also suitable for:

Vpf8 seriesVpf12 series

Table of Contents