Luminaire led ARV17/YRV17 LED Installation Manual

Advertisement

INSTALLATION GUIDE FOR
ARV17/YRV17 LED

SAFETY PRECAUTIONS

WARNING - Risk of fire or electric shock. Basic safety precautions should always be
followed when using electrical equipment.
WARNING - This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the
product and the hazards involved.
WARNING - Disconnect power to all circuits before wiring fixture.
WARNING - Install in accordance with all national, state, and local codes.
WARNING - The main (white LED) circuit and the auxiliary circuit (Nightlight) are to
be wired to separate circuits that can't be powered on simultaneously.
WARNING - Do not connect to an ungrounded supply.
WARNING - Read all fixture markings and labels to ensure correct installation of
fixture.
RETAIN THESE INSTRUCTION FOR FUTURE USE
One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) |
www.luminaireled.net
| © 2020 Acuity Brands Lighting, Inc. All rights reserved.
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ARV17/YRV17 LED and is the answer not in the manual?

Questions and answers

Summary of Contents for Luminaire led ARV17/YRV17 LED

  • Page 1 INSTALLATION GUIDE FOR ARV17/YRV17 LED SAFETY PRECAUTIONS WARNING - Risk of fire or electric shock. Basic safety precautions should always be followed when using electrical equipment. WARNING - This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • Page 2 INSTALLATION GUIDE FOR ARV17/YRV17 LED CAN ICES-005 (A) / NMB-005 (A) FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 INSTALLATION GUIDE FOR ARV17/YRV17 LED Set Screw INSTALLATION PROCEDURE WARNING - The main (white LED) circuit and the auxiliary circuit (Nightlight) are to be wired to separate circuits that can’t be powered on simultaneously. 1. Remove Luminaire from carton and check for damage 2.

Table of Contents