1. Manuals
  2. Brands
  3. Luminaire led Manuals
  4. Lighting Equipment
  5. FFW1212 Series
  6. Installation manual

Luminaire led FFW1212 Series Installation Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

INSTALLATION GUIDE FOR FFW1212 SERIES

SAFETY PRECAUTIONS

WARNING - Risk of fire or electric shock. Basic safety precautions should always be
followed when using electrical equipment.
WARNING - This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the
product and the hazards involved.
WARNING - Disconnect power to all circuits before wiring fixture.
WARNING - Install in accordance with all national, state, and local codes.
WARNING - Do not connect to an ungrounded supply.
WARNING - Read all fixture markings and labels to ensure correct installation of
fixture.
WARNING – Do not apply power to the fixture until the LED Board assembly is
connected to the driver. If power is applied to the fixture prior to connecting the LED
Board assembly to the driver, this will cause the LED Board to fail and void the
warranty.
RETAIN THESE INSTRUCTION FOR FUTURE USE
One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) |
www.luminaireled.net
| © 2020 Acuity Brands Lighting, Inc. All rights reserved.
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FFW1212 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Luminaire led FFW1212 Series

Summary of Contents for Luminaire led FFW1212 Series

  • Page 1 INSTALLATION GUIDE FOR FFW1212 SERIES SAFETY PRECAUTIONS WARNING - Risk of fire or electric shock. Basic safety precautions should always be followed when using electrical equipment. WARNING - This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • Page 2 INSTALLATION GUIDE FOR FFW1212 SERIES CAN ICES-005 (A) / NMB-005 (A) FCC COMPLIANCE STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 INSTALLATION GUIDE FOR FFW1212 SERIES Lens Clamp Lens End Cap Housing INSTALLATION INSTRUCTIONS 1. Remove Luminaire from carton and check for damage. 2. Remove Lens clamps via 8-32 screws, set aside. 3. Remove Lens, set aside. 4. Remove LED Board Assembly by loosening (4) ¼ hex screws.

Table of Contents