Easy Setup; Safety Instructions - Advantech AIM-75 Quick Start Manual

Easy Setup

Power On Computer
Model: AIM-75 Rating 5/9/12 Vdc / 3.0A
1.
This product is intended to be supplied by a UL Listed
2.
Power Adapter( FSP：A16-018N1A), rated 5/9 Vdc, 3A
min. for model AIM-75, and Tma 50 degree C. Please
contact Advantech for further information and
assistance.
3. The product is equipped with shipping mode for battery
protected and power saving, please charge the
embedded battery of the computer: Connect the Micro
USB adaptor on the AIM-75 () computer. ("H" on the
description of parts.) Please charge for at least one hour
when you use this computer for the first time.
Push the Power button ("J" on description of parts.) for
4.
3~4 seconds to start the computer.
While the computer is running, push the power button
5.
for 1 second will disable LCD backlight for power saving.
Push the power button again will enable the backlight
again; press the power button for 10 seconds while
computer is running, the system will be forced
shutdown
Environment:
6.
 Operating Temperature(Charging): 0°C ~+40 °C
 Operating Temperature (Discharging):
-10°C ~+50 °C
 Storage: -20°C ~ +60°C

Safety Instructions

Please read these safety instructions carefully and follow
these instructions for use. Repair of the device may only be
carried by trained service personnel. Advantech recommends
that a service contact be obtained with Advantech service and
that all repairs also be carried out by them; otherwise the
correct functioning of the device may be compromised.
WARNING! Because of the danger of electrical shock, never
remove the cover of a device while it is in
operation or connected to a power outlet.
If one of the following situations arises, have the equipment
checked by service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated the equipment.
• The equipment has been exposed to moisture.
• The equipment does not work well, or you cannot get it to
work according to the user's manual.
• The equipment has been dropped and damaged.
• The equipment has obvious signs of breakage. Disconnect
this equipment from any AC outlet before cleaning. Use a
damp cloth. Do not use liquid or spray detergents for
cleaning and keep this equipment away from humidity.
CAUTION! To avoid short-circuits and otherwise damaging
the device, do not allow fluids to come in contact
with the device. If fluids are accidentally spilled
on the equipment, remove the affected unit
from service as soon as possible and contact
service personnel to verify that patient safety is
not compromised.