Table of Contents
Advertisement
BACKGROUND OPERATIONS
Priority Scan Setup
This transceiver can be set with two priority channels at the same time.Users can set the desired
priority scan by programming software. If transceiver set priority scan, under scanning and receiving
no signal state, it will scan every channel and also test priority channel at a time. When the non-
priority channel receives signal, it will test priority channel according to flyback time A and flyback
time B setup by users.
Resume Factory Default
You can make all the settings of transceiver return to the factory default settings when it has troubles,
can't work properly or simply you wish to change settings.
Press [PTT] and [PF1] key together while turning on. Keep holding the two keys for more than 1
second. It will resume Factory Default after announcing current channel number.
Note: This function may be prohibited by dealer programming.
26
Professional
FM Transceiver
Advertisement
Table of Contents
