Product Overview - Analog Devices Blackfin EZ-Extender Manual

Hide thumbs Also See for Blackfin EZ-Extender:

Table of Contents

Product Overview

The Blackfin EZ-Extender is a separately sold assembly that plugs onto

the expansion interface of the ADSP-BF533/BF561 EZ-KIT Lite evalua-

tion system.

The board extends the capabilities of the evaluation system by providing a

connection between the parallel peripheral interface (PPI) of the

ADSP-BF533 processor (the

processor), an Analog Devices high-speed converter (HSC) evaluation

board, a camera evaluation board, and an LCD display device. Moreover,

the extender broadens the range of the EZ-KIT Lite applications by pro-

viding surface mounted (SMT) footprints for breadboard capabilities and

access to all of the pins on the EZ-KIT Lite's expansion interface.

Please visit

www.analog.com/EX1-Extender

including CCES support.

The extender features:

• High-speed converter (HSC) evaluation board interface

• 40-pin, right angle, 0.1 in. spacing, female socket to con-

nect to analog-to-digital converter (ADC) boards

• 40-pin straight, 0.1 in. spacing header to connect to digi-

tal-to-analog converter (DAC) boards

• Switches for routing and direction selection

• RJ-45 with serial peripheral interconnect (SPI) to configure

converter registers

viii

and

interfaces of the ADSP-BF561

PPI0

PPI1

for additional information,

Blackfin EZ-Extender Manual

Table of Contents

Do you have a question about the Blackfin EZ-Extender and is the answer not in the manual?