Table of Contents
Advertisement
Available languages
Available languages
•
Do not store flammable gas and liquid in the
appliance.
•
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
•
Do not touch the compressor or the condenser.
They are hot.
•
Do not remove or touch items from the freezer
compartment if your hands are wet or damp.
•
Do not freeze again food that has been thawed.
•
Obey the storage instructions on the packaging
of frozen food.
CARE AND CLEANING
WARNING! Risk of injury or damage
to the appliance.
•
Before maintenance, deactivate the appliance
and disconnect the mains plug from the mains
socket.
•
This appliance contains hydrocarbons in the
cooling unit. Only a qualified person must do the
maintenance and the recharging of the unit.
CONTROL PANEL
1
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise to a
medium setting.
Power indicator and alarm lights will illuminate.
SWITCHING OFF
To turn off the appliance, turn the temperature
regulator to
position.
The power indicator light remains
switched on until the appliance is
disconnected from the power socket.
2
3
•
Regularly examine the drain of the appliance and
if necessary, clean it. If the drain is blocked,
defrosted water collects in the bottom of the
appliance.
DISPOSAL
WARNING! Risk of injury or
suffocation.
•
Disconnect the appliance from the mains
supply.
•
Cut off the mains cable and discard it.
•
Remove the door to prevent children and pets
to be closed inside of the appliance.
•
The refrigerant circuit and the insulation
materials of this appliance are ozone-friendly.
•
The insulation foam contains flammable gas.
Contact your municipal authority for information
on how to discard the appliance correctly.
•
Do not cause damage to the part of the cooling
unit that is near the heat exchanger.
Temperature regulator
1
Alarm light
2
Power indicator light
3
TEMPERATURE REGULATION
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
1. turn the temperature regulator towards lower
settings to obtain the minimum coldness
2. turn the temperature regulator towards higher
settings to obtain the maximum coldness
11
Advertisement
Table of Contents
