Table of Contents
Advertisement
Quick Links
SMPWP Series
DC Outdoor Power Supply/Chargers
Models Include:
SMP3WP
- 2.5A @ 12VDC or 24VDC
- 115/230VAC input.
SMP5WP
- 3.5A @ 12VDC or 24VDC.
- 115/230VAC input.
Installation Guide
Rev. 040622
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
SMP7WP
- 6A @ 12VDC or 24VDC.
- 115VAC input.
SMP7WPV
- 6A @ 12VDC or 24VDC.
- 230VAC input.
More than just power.
TM
Advertisement
Table of Contents
Related Manuals for Altronix SMPWP Series
Summary of Contents for Altronix SMPWP Series
- Page 1 SMPWP Series DC Outdoor Power Supply/Chargers Models Include: SMP3WP SMP7WP - 2.5A @ 12VDC or 24VDC - 6A @ 12VDC or 24VDC. - 115/230VAC input. - 115VAC input. SMP5WP SMP7WPV - 3.5A @ 12VDC or 24VDC. - 6A @ 12VDC or 24VDC.
- Page 2 3. Mount unit in the desired location. For wall mounting refer to Fig. 3, pg. 6. For pole mounting installation refer to pg. 6 - (Using Optional Altronix Pole Mount Kit PMK1 - not included). 4. Install backplane inside the enclosure with hardware.
- Page 3 12VDC or 24VDC @ 3.5A supply current. – DC + SMP7WP: 12VDC or 24VDC @ 6A supply current. SMP7WPV: 12VDC or 24VDC @ 6A supply current. – BAT + Stand-by battery connections. Maximum charge rate 500mA. SMPWP Series Installation Guide - 3 -...
- Page 4 Fig. 2 - SMPWP Series Fig. 2a Fig. 2b OFF - 24V - BAT+ - DC + ON - 12V Input 115VAC or 220VAC Fig. 2c Ground Lug - 4 - SMPWP Series Installation Guide...
- Page 5 (servicing) instructions in the literature accompanying the appliance. CAUTION: To reduce the risk of electric shock do not open enclosure. There are no user serviceable parts inside. Refer servicing to qualified service personnel. SMPWP Series Installation Guide - 5 -...
- Page 6 This installation should be made by qualified service personnel. This product contains no serviceable parts. PMK1 is intended for use with Altronix outdoor rated power supplies or accessories housed in WP1, WP3 and WP4 enclosures. Brackets are designed for use with the Wormgear Quick Release Straps (two included).
- Page 7 Notes: SMPWP Series Installation Guide - 7 -...
- Page 8 MOUNTING PANEL 0.08” (2mm) CARBON STEEL SHEET 4.21” (107mm) Altronix is not responsible for any typographical errors. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com IISMPWP Series D06V...
Need help?
Do you have a question about the SMPWP Series and is the answer not in the manual?
Questions and answers