Table of Contents
Advertisement
INSTALLATION
CART ASSEMBLY INSTRUCTIONS
3. Position tabs on side bracket to fit into slots on the cart (be aware of pinch points)(Fig. 10 -12). When complete,
the landing ledge should sit flush on the top of the cart (no gap).
4. Secure the head to rear of cart (Fig. 13) with Phillips-head screws provided (10-24 x 12mm).
Fig. 10
Fig. 13
STEP 4
Front End Screw Installation
1. Install remaining screws (10-24 x 12mm) into the front of head to the cart (Fig.14).
2. Slide drip tray/pan back into place.
Fig. 14
PINCH POINT
Fig. 11
7
Fig. 12
Advertisement
Table of Contents
