Table of Contents
Advertisement
INSTALLATION
CART ASSEMBLY INSTRUCTIONS
STEP 3
Head Placement onto Cart (2 Persons Required)
1. Remove drip tray/pan (Fig. 07) and other removable components
(to lighten the load) such as grates, top burner caps and
components, and griddle flue cover, radiant tray and grill burner
for easier handling.
2. Two persons required to lift head (images for illustration only -
burner/sink model shown is not currently available in New Zealand and
Australia). Placing head on cart, place rear of head over the rear of
the cart first (Fig. 08). Then allow the rear side tabs to first locate
in the slots on the top of the cart sides. The other tabs will locate
in the middle and front slots as the head is lowered into position
on the cart (Fig. 09).
Fig. 08
6
Fig. 07
TABS
Fig. 09
Advertisement
Table of Contents
