Overview - Front Panel Controls - Inter-m MEQ-2000 Operating Manual

MEQ-2000
OVERVIEW – Front Panel Controls
1. Input Levels
Two analog input level controls with ±12dB range.
2. Input Level Meters
Two eight-segment LED level meters with Clip indicators.
3. LCD Display
Blue backlit LCD 240 X 64 display provides instant parameter readouts.
4. Soft Keys F1 ~ F6
These soft keys perform a variety of functions based on the currently selected
software parameter. Their function will always be shown directly above the keys
on the LCD display (3).
5. Display Mode Keys
These keys are used to select the current display mode. Options are Setup, Utility
and Memory. The current selection is shown by the keys' integrated LEDs.
6. Function Keys
These keys are used to select the current function mode. Options are Mute,
Bypass, Preset 1 and Preset 2. The current selection is shown by the keys'
integrated LEDs.
7. Cursor Keys
These four keys (Up, Down, Right and Left) are used in conjunction with the
Parameter Wheel (8) to navigate the on-screen menu functions.
8. Parameter Wheel
This wheel is used in conjunction with the Cursor Keys (7) to navigate the on-
screen menu functions.
24/96 Multimode Equalizer
9