Override Switch; Led Status Indicator - Clarion UNGO MS5500 Install Manual

Mounting For Shock
and Motion Sensitivity

Override Switch

Mount the Override Switch in a location near the driver where it is easily accessible but not
plainly visible. Plug the blue override switch connector into the blue 2-pin socket on the
main unit.
Be sure that the switch cannot accidentally be pressed or damaged by movement of
passengers or contents within the vehicle.

LED Status Indicator

Mount the status LED so that it is visible from both sides of the vehicle. Plug the white
LED connector into white 2-pin socket on the Main Unit.
Mounting For
Shock Sensitivity Only
Motion Sensitivity
Front/Rear Side to Side
Least Best
Good Good
Good
Good
Best Least
Position
MS5500 Installation Manual - Page 5