Table of Contents
Advertisement
SERVICE ACCESS
We recommend locating the service holes on either side of the DishDrawer as shown below.
z
If the hole is created through wood, ensure the edges are smooth and rounded
z
If the holes is created through metal, ensure the edge protector is fitted.
z
SERVICE HOLE DIMENSIONS
A Maximum distance between rear of cavity and service hole
B Maximum distance between shelf and service hole
C Minimum diameter of service hole
CABINETRY PREPARATION
A
C
REAR
PROFILE
WALL
B
SHELF
MM
5
10
57
MOISTURE PROTECTION
1
10mm
SIDE PARTITION
1
SELECT CABINETRY SECURING METHOD
METHOD A
Secure to cabinetry via brackets
Recommended method*
*Frameless cabinetry only
Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
If securing via the drawer removal method,
ensure the marked locations provide
adequate support.
If there are no side partitions, construct timber
bracing to secure the fixings to.
METHOD B
Secure via drawer removal
9
Advertisement
Table of Contents
