Preparations For Use; Connecting The Locator Probe To The Ultratev Plus² - EA Technology UTL2 Operating Manual

EA Technology
2.

Preparations for use

2.1 Connecting the Locator probe to the UltraTEV Plus²
The Locator probe has a fixed 2m cable and a 6m extension cable for a maximum location range of
8 metres. The Locator probe is plugged directly into the UltraTEV Plus² accessory port. When the
Locator probe is connected, the UltraTEV Plus² will automatically program the Locator probe with
the correct version of firmware. This process takes between 2 and 4 seconds. When the Locator
probe is ready to use, the Power Indicator will illuminate red.
UltraTEV Locator Probe Operating Manual
Page 3 of 19
2852-MANUL-V01.03.00