Table of Contents
Advertisement
EA Technology
3.
Operating Instructions
It is recommended, but not required, that during locating, the user holds the UltraTEV Plus
right hand and the Locator probe in their left hand, so the trigger levels and indicators are on the
correct sides of the UltraTEV Plus² screen. When locating across larger distances, the Locator probe
can be attached to the switchgear using the magnet which is located behind the TEV plate at the top
of the probe. The Locator probe should be placed on the switchgear in a vertical position, to allow
correct fixing of the magnet.
The Locator Probe and UltraTEV Plus² should be used 10cm or more apart, to allow
discrimination between the two probes.
UltraTEV Locator Probe Operating Manual
Page 6 of 19
2852-MANUL-V01.03.00
in their
2
Advertisement
Table of Contents
