EA Technology UTL2 Operating Manual page 15

EA Technology UltraTEV Locator Probe Operating Manual 2852-MANUL-V01.03.00
The below images show locating a single source with Locator Advanced mode:
When the histogram peak is on the left hand side of 0, the source is determined to be closer to the
Locator probe.
When the histogram peak is on the right hand side of 0, the source is determined to be closer to the
UltraTEV Plus .
2
Multiple PD sources will show as separate peaks on the histogram. On the example below, one
source is directly between the two probes, and one is closer to the UltraTEV Plus .
2
Page 11 of 19