Declaration Of Conformity; Maintenance; Warranty Policy - EA Technology UTL2 Operating Manual

EA Technology
5.

Declaration of Conformity

Hereby, EA Technology declares that the equipment described in this document is in compliance
with all applicable EU Directives and UK Statutory Instruments.
The full text of the EU and UK declarations of conformity are available at the following internet
address: www.eatechnology.com/declaration
Claims of compliance made in any document other than the relevant declaration of conformity are
for guidance only.
6.

Maintenance

No attempt should be made to gain access to the internal circuitry of the UltraTEV Plus², Locator
probe or its accessories. Advice should be sought from the manufacturer, or the supplier, if any
doubt exists over the equipment's performance or operation.
Avoid storage in damp and humid conditions and do not subject it to temperature extremes,
excessive vibration or shocks
7.

Warranty Policy

What Does the Warranty Policy Cover?
EA Technology products and accessories are warranted against defects in material and workmanship
for twelve months from the date of despatch from our premises.
During the warranty period, EA Technology will, at its option, either repair or replace products, parts
or accessories which prove defective.
What is Not Covered by the Warranty Policy?
The following are not covered: damage caused by accident, misuse, abuse, product modification or
neglect; damage resulting from failure to follow instructions contained in your operating manual;
damage resulting from the performance of repairs by someone not authorised by EA Technology.
Warranty Policy for Repairs
Repaired products are warranted against defects in workmanship and materials for a period of six
months, or the remainder of the original warranty period, whichever is greater.
UltraTEV Locator Probe Operating Manual
Page 14 of 19
2852-MANUL-V01.03.00