Calibration; Repair; Waste Electrical And Electronic Equipment Directive (Weee); Continuous Improvement - EA Technology UTL2 Operating Manual

EA Technology
8.

Calibration

The Locator probe does not require recalibration. We recommend that it is returned for a functional
check with the UltraTEV Plus², during annual calibration of the UltraTEV Plus².
For information about calibration of the UltraTEV Plus², please refer to the UltraTEV Plus² operating
manual.
9.

Repair

For information on repairs
product-support@eatechnology.com
10. Waste Electrical and Electronic Equipment
Directive (WEEE)
EA Technology is a member of an approved compliance scheme as defined by the WEEE directive.
When an EA Technology product reaches the end of its operational life, it must be recycled by a
licensed waste management operator or returned to EA Technology for recycling.

11. Continuous Improvement

EA Technology has a policy of continual product development and enhancement. Consequently,
there may be minor variations in specifications or operation that are not covered in this operating
manual.
Every effort has been made to ensure that the information provided in this operating manual is
accurate at the time of going to print.
If any errors or omissions are noticed, please notify
product-support@eatechnology.com
UltraTEV Locator Probe Operating Manual
Page 16 of 19
2852-MANUL-V01.03.00