Table of Contents
Advertisement
User Manual For RS485-ZDM556C Stepper Drive
5 Mechanical Specifications
※ Recommend side installa on, be er cooling effect, when design installa on dimension, consider the terminal
size and wiring!
Enhance Cooling method
℃
A:The driver's reliable operating temperature is usually within 60 , the motor operating temperature
is within
80 ; ℃
B: It is recommended to use the automatic half-flow mode, the current will be automatically reduced by half
when the motor stops, so as to reduce the heating of the motor and the drive;
C: When installing the driver, please use the vertical side installation, so that the cooling teeth form a strong air
convection; when necessary, install a fan where is close to the drive, forced cooling to ensure that the drive is in
a reliable working temperature range
6 Connectors and Pin Assignment
Office Add. : C-83, Zaveri Industrial Estate, Kathwada – Singarva Road, Kathwada, Ahmedabad-382430.
Email :
zenex.automation@yahoo.com
,Website :
www.zenexautomation.net
Contact (M) : +91 – 9727764623 / +91 - 9978030413
Advertisement
Table of Contents
