7.3 SW8: The terminal resistor selection for RS485.
OFF=RS485 R off(default)
OFF=RS485 R on
8 Stepper Motors
RS485-ST68D can work with the following ZENEX AUTOMATION's ECN series stepper motors:
8.1 Nema23motor
8.2 Nema24motor
8.3 Nema34motor
Office Add. : C-83, Zaveri Industrial Estate, Kathwada – Singarva Road, Kathwada, Ahmedabad-382430.
Email :
zenex.automation@yahoo.com
Contact (M) : +91 – 9727764623 / +91 - 9978030413
User Manual For RS485-ZDM556C Stepper Drive
,Website :
www.zenexautomation.net