Table of Contents
Advertisement
User Manual For RS485-ZDM556C Stepper Drive
11 Frequently Asked Questions
In the event that your drive doesn't operate properly, the first step is to identify whether the problem is
electrical or mechanical in nature. The next step is to isolate the system component that is causing the
problem.As part of this process you may have to disconnect the individual components that make up your
system and verify that they operate independently. It is important to document each step in the troubleshooting
process. You may need this documentation to refer back to at a later date, and these details will greatly assist
our Technical Support staff in determining the problem should you need assistance.
Many of the problems that affect motion control systems can be traced to electrical noise, controller software
errors, or mistake in wiring.
Problem Symptoms and Possible Causes
Office Add. : C-83, Zaveri Industrial Estate, Kathwada – Singarva Road, Kathwada, Ahmedabad-382430.
Email :
zenex.automation@yahoo.com
,Website :
www.zenexautomation.net
Contact (M) : +91 – 9727764623 / +91 - 9978030413
Advertisement
Table of Contents
