Advertisement
15
在看得見的地方貼上備用資料標籤並插好氣體煮
食爐電源插頭
備用資料標籤
17
測試工作
分開點燃每個爐頭，然後點燃所有爐頭，檢查點火系統是否正常工作。
檢查火焰是否呈藍色，焰尾不帶黃色。
如果發現異常，檢查爐頭零件安裝是否正確。
如果無法實現正常工作，請聯絡客戶服務部。
在氣體煮食爐能正常工作之前，使用者不得使用氣體煮食爐。
火焰噴離爐頭
焰尾呈黃色
正常火焰
To enable the gas supply to be readily shut o by the customer, make sure the conne
is tted with an isolating valve close to the cooktop.
16
If connecting the gas with a exible hose:
安裝平底鍋架
Ensure the hose is long enough to allow for removal of cooktop for servicing.
Make sure the connector is located as shown in step 3 CLEARANCE DIMENSIONS.
The hose assembly must be AS/NZS 1869 Class B or D certi ed, with an Rp ½" (ISO 7
確保平底鍋架放到位，
The hose assembly must be as short as practicable and comply with relevant AS 560
且方向正確
The hose must not be kinked, subjected to abrasion or permanently deformed.
（參看使用者指南）
The hose must not be near or in contact with any hot surfaces
(e.g. base of metal hotlplate, ue, or chassis of underbench oven etc.)
GAS
GAS
ON
ON
25
check all
Advertisement
