Replacing The Remote Controller Battery - InFocus Work Big IN15 User Manual

General Guide

Replacing the Remote Controller Battery

Before you can use the remote controller for the first time, you need to load the battery that
comes with it.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
Caution
TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Misuse of a battery can cause it to leak and stain the area around it, or to
explode, creating the risk of fire and personal injury. Make sure that you
Caution
always observe the following precautions.
1.
Hook your fingernail on the groove of
the battery holder on the back of the
remote controller. While holding down
the release on the side ( ), pull out
the holder ( ).
1
2
3.
Replace the battery holder back into the remote controller.
Take care that the battery is oriented correctly when you load it.
Use only battery type that is specified for use with the remote controller.
2.
Place the battery (CR2025) onto the
battery holder.
Make sure that the plus (+) side of the
battery is facing upwards (so you can
see it). Take care that you do not
install the battery upside down.
6