InFocus Work Big IN15 User Manual page 21

Problem
The message "It is
time to replace the
lamp." is being
projected.
The message "The
lamp has exceeded
its service life!." is
being projected.
Try performing the following steps, which can return the projector to normal operation.
1. Press the [ ] (power) key to turn off the projector.
2. After the projector's cool down is finished and the fan is completely stopped, unplug the
AC power cord.
3. Plug the power cord back in and turn the projector back on again.
* If the power off confirmation message does not appear when you press the [
(power) key, unplug the AC power cord and wait for at least 10 minutes. Then plug
the power cord back in and turn the projector back on again.
Cause and Recommended Action
It is time to replace the lamp.
➔ Replace the lamp (see "Replacing the Lamp").
The allowable life for the lamp has been exceeded,
and the projector will not turn on.
➔ Replace the lamp (see "Replacing the Lamp").
21
Troubleshooting
See
Reference
Guide
(CD-ROM)
Reference
Guide
(CD-ROM)
]