Remote Control Battery Installation - InFocus IN119HDxa User Manual

Remote Control Battery Installation

1. Press firmly and slide the
battery cover off.
2. Install new battery into the
compartment. Remove the
old battery and install new
one (CR2025). Ensure that
the side with a "+" is facing
up.
3. Put the cover back.
To ensure safe operation, please observe the following
precautions :
Use CR2025 type battery.
`
Avoid contact with water or liquid.
`
Do not expose the remote control to moisture or heat.
`
Do not drop the remote control.
`
If the battery has leaked in the remote control, carefully wipe
`
the case clean and install new battery.
Risk of an explosion if battery is replaced by an incorrect type.
`
Dispose of used battery according to the instructions.
`
User Controls
25
English