Table of Contents
Advertisement
UFCD – Settings menu
Settings menu:
Here it is possible to set the barometric pressure for the altimeter
and the RADAR altitude warning flag.
Set baro:
To set the local barometric pressure:
1. Click on the "BARO" button
2. Input the value
Example:
For 29.87inHg
Click 0, then 2, then 9, then 8, then 7
3. Click ENT Enter
Now the altimeter is set on the desired pressure and the new
barometric setting is displayed in the HUD below the altitude
indication.
CAUTION: The standby altimeter has it's own independent
barometric setting directly on the instrument. If not set separately
the standby altimeter could show wrong values!
Set RADAR altimeter warning flag:
1. Click on the "R ALT" button
2. Input the value
Example:
For 300ft:
Click 0, then 0, then 0, then 3
3. Click ENT Enter
Now the 300 ft will be displayed on the R ALT button.
Page 42
Advertisement
Table of Contents
