1.3 Ec Declaration Of Conformity - Vetter SmartFork FrontCam ATEX Operating Instructions Manual

SmartFork ® overview
EC declaration of conformity
1.3
EN
8
SmartFork
EC declaration of conformity
VETTER Industrie GmbH, as the manufacturer, hereby declares that the products listed
below comply with the standards and guidelines listed below.
Name: - SmartFork Frontcam ATEX
Solid stainless steel fork arm with camera built into the fork tip for use in
potentially explosive atmospheres.
Model: - 150701800WGXSFR-001 S.-Nr. 1 - 24
Ex zone - II 2G Ex h db IIB T5 Gb
marking:
II 2D Ex h tb IIIB T95°C Db
This declaration is void if a change is made to the aforementioned equipment. The
authorised agent for compiling the technical documentation is the signatory.
The subject of the declaration described above complies with the relevant EU harmonisa-
tion legislation.
Applied national standards and guidelines:
2014/34/EU Annex II - Legislation covering equipment and protective systems
2006/42/EC - Machinery Directive
DIN EN 1755:2016 - Industrial Trucks - Safety requirements and verification - Sup-
EN ISO 80079-36:2016 - Non-electrical equipment for explosive atmospheres - Basic
EN ISO 80079-37:2016 - Non-electrical type of protection "h"
EN IEC 60079-0:2018 - Explosive atmospheres – Equipment – General requirements
EN 60079-1:2014 - Explosive atmospheres – Equipment protection by flameproof
EN 60079-31:2014 - Explosive atmospheres - Equipment dust ignition protection by
Notified body:
EU type examination certificate: - BVS 20 ATEX E 108 X
DEKRA Testing and Certification GmbH (0158), the notified body, was involved in the pro-
duction control and has confirmed conformity with the type for the aforementioned serial
numbers
BVS 21 ATEX ZQ 163-01
VETTER Industrie GmbH
Carl-Benz-Strasse 45
57299 Burbach/Germany
Gunther Grindel (Technical Director)
®
FrontCam ATEX for use in the Ex zone - BVS 20 ATEX E 108 X
intended for use in potentially explosive atmospheres
plementary requirements for operation in potentially explosive
atmospheres
method and requirements
enclosures "d"
enclosure enclosure "t"
- DEKRA Testing and Certification GmbH (0158)