Vetter SmartFork FrontCam ATEX Operating Instructions Manual page 22

Safety
Safety markings
EN
ATEX type
plate
22
SmartFork
W: Week of manufacture
J: Year of manufacture
F: Production order number
Number of the EC type examination certificate
The number of the type examination certificate is located on a type plate
sticker on the side of the fork back, below the hard stamping.
Fork arms for use in Ex zones must be equipped with a corresponding Ex
zone classification and may only be used together with the approved des-
ignated carrier vehicle in the Ex zones approved for the fork arm and car-
rier vehicle.
The ATEX type plate provides information about the intended deployment environment for
the SmartFork ® upon delivery and is located on the fork back underneath the hard
stamping.
The ATEX type plate contains specifications for the equipment group, equipment cate-
gory, hazard type (type of potentially explosive atmosphere) and maximum temperature
value (For further details, see
Fig. 3: ATEX type plate (example)
Only use the SmartFork ®
operation without an Ex zone marking.
®
FrontCam ATEX for use in the Ex zone - BVS 20 ATEX E 108 X
Ä Further information on page 6).
in the Ex zone specified here. Do not put the SmartFork ® into