Table of Contents
Advertisement
Install and connect an ATEX-compliant camera monitor as per the supplied oper-
ating manual and the PIN assignment listed in the technical data.
4.3
Establishing cable connections
Personnel:
Protective equipment:
Fig. 8: Plug connector of type GHG57
Establish the plug connection between the SmartFork
ATEX-certified, Fig. 8) and the cable connection for the lift mast connector (observe the
enclosed cable diagram). Clean the plug connector before establishing the connection.
Matching plug connections should be securely connected and, if necessary, secured to
prevent unintended unplugging. Ensure that all plug connections are secure.
SmartFork
NOTICE!
Install the monitor in the driver's cab so that the monitor does not obstruct
or impede any functions or elements of the industrial truck.
n
Electrician
n
Protective work clothing
n
Industrial helmet
Protective gloves
n
n
Safety shoes
NOTICE!
Restrict the intake current!
The operator of the overall system (industrial truck) must prevent exces-
sive current consumption (fault current) by the electrical components by
means of suitable technical devices in order to prevent damage to the
assistance system.
– Always ensure the permissible supply voltage of 12 - 24 V DC with
power consumption of max. 0.5 W.
®
FrontCam ATEX for use in the Ex zone - BVS 20 ATEX E 108 X
Assembly
Establishing cable connections
®
(plug connector of type GHG57,
EN
33
Advertisement
Table of Contents
