Advertisement
'F' Fault Codes
If the display is showing an
fault code, you may be able to clear the fault by resetting the dishwasher - see the steps below. If the fault persists, note
down the code before
disconnecting the dishwasher from the water and power supplies and contact Customer Care.
To attempt to Clear the
Fault Code
1. Press
to stop the beeping. Press
again to turn the dishwasher off.
2. Wait a few seconds. Press
again to turn the dishwasher back on.
If the fault code has disappeared then the fault has been reset and you can continue to use your dishwasher.
https://producthelp.fisherpaykel.com/eu/Clean/DishDrawer%E2%84%A2/Integrated_Single/DD60SHTI9/User_Guide_DD60S...
• If a fault occurs in one drawer only you
are still able to use the other drawer.
• If you have paused a drawer during a
wash program, and the other drawer
then faults, the paused drawer indicator
will continue flashing but will be
dimmed.
Updated: Tue, 02 Nov 2021 07:04:16 GMT
Powered by
2
Advertisement
