Table of Contents
Advertisement
Diaphragm Dosing Pump Encore
MB/ME
®
Operating Instructions
WARNING!
Risk of electric shock. Connect the device only to a SCHUKO socket outlet protected by a ground fault circuit interrupter (GFCI). Contact a qualified electrician if
you are uncertain whether the socket is protected by a GFCI.
Do not bury the cable. Fix the cable to minimize possible damage due to lawn mowers, hedge trimmers, and other equipment.
WARNING!
To reduce the risk of electric shock, replace the cable immediately if damaged.
WARNING!
To reduce the risk of electric shock, do not use an extension cable to connect the device to the power supply; use an appropriately located outlet socket.
1.5 Hazards due to failure to follow safety instructions
Failure to follow the safety instructions may endanger not only persons, but also the environment and the device. Failure to follow the safety instructions may
invalidate any damage claims.
The following hazards in particular may result:
• failure of major equipment functions
• failure of required maintenance and repair methods
• danger to persons due to electrical, mechanical and chemical effects
• danger to the environment due to leakage of hazardous substances
1.6 Safety-conscious working
The safety instructions contained in this operation manual must be observed. The operating company is responsible for ensuring compliance with local safety
regulations. Faults that may affect safety must be repaired immediately!
1.7 Safety instructions for the operating company/operator
Leakages of dangerous substances (e.g. aggressive, toxic), for example due to a broken diaphragm, must be suitably drained away so that they do not cause
danger to persons or the environment. Statutory regulations must be observed.
Dangers due to electric current must be prevented (for further details, refer to the VDE
regulations and regulations of the local power supply companies).
1)
1)
German Association for Electrical, Electronic & Information Technologies
Separate regulations must be observed if the Encore
ME is operated in areas with a potentially explosive atmosphere. The operating company must determine
®
the explosion hazard (area classification) and select the appropriate equipment. Further information can be found in paragraph 7.1 (Installation), paragraph 7.4
(Electrical connection) and section 12, page 38 (Explosion-proof dosing pumps).
1.8 Safety instructions for inspection, maintenance and installation work
The operating company must ensure that all maintenance, inspection and installation work is undertaken by authorized and duly qualified personnel, who have
studied this operation manual.
Any work on the machine must only be carried out after it has been brought to a complete stop. Always follow the procedure specified in the operation manual for
shutting down the dosing pump/system.
Dosing pumps or systems which convey hazardous media must be decontaminated.
All safety and protective equipment must be re-attached and activated immediately after the work has been completed.
CF.450.410.001.IM.1114
6
Advertisement
Table of Contents
