Fisher & Paykel SINGLE DISHDRAWER DD60STX6I1 Installation Manual page 14

PUSH THE PRODUCT INTO THE CAVITY
1
2
14
If securing via bracket method:
Secure all four side brackets to the
DishDrawer™ Dishwasher, aligning
bracket A with slot A and bracket B
with slot B.
Ensure the ends of the brackets are not
pushed into the chassis.
Push the product into the cavity, pulling
the hoses through as you push to avoid
crushing or twisting them.
Push the product in the positions
illustrated to avoid denting the door.
SECURE THE VENTING HOSE TO CABINETRY
VENTING THROUGH CABINETRY
Unframed cabinetry
Route the venting hose to the cutout
and push onto the duct firmly to secure.
Push the duct onto the cabinetry and
secure using the four provided screws.
Framed cabinetry
Route the venting hose to the cutout
and push onto the duct firmly to secure.
Place duct into cutout and insert the
bracket into vent slot. Secure using the
five provided screws.
VENTING THROUGH FLOOR
Route the venting hose through
the floor. Ensure any excess hose is
removed.