Priming The Fuel System - UPRENT Betsy 125H User Manual

7.2

Priming the fuel system

WARNING
Always check fuel level in fuel tank. Don't start the pump when fuel is running low. In
this case air can get in fuel system.
Prime the fuel system before starting the engine for the first time, after the fuel tank has been
drained completely or after replacement of the fuel filter(s).
1. Open the bleeder screw (1)
2. Squeeze the manual pump (2). Repeat this until fuel exits the bleeder screw (1).
3. Close the bleeder screw (1).
4. Visually inspect the fuel lines for routing and leakage.
16