Daily Maintenance Of The Pump - UPRENT Betsy 125H User Manual

7

Daily maintenance of the pump

Note
Perform daily maintenance pump must be switched off. The sight glasses must be
at least half filled and oil may not be discolored.
1. Check the oil level and clarity of the oil in the pumps seal chamber (1). If the oil is not clear
but white, its means that the oil contains water. Drain this mixture, check the seal and fill the
seal chamber with fresh oil.
2. Check the oil level in the vacuum oil reservoir with the glass in the sidewall of the oil reservoir
(2), and add if necessary.
3. Check the oil level of the engine and add if necessary (3).
4. Check the level of the fuel in the fuel tank and add if necessary.
5. Check the state and tension of the divisible belt, which drives the vacuum pump (4).
6. Check whether all panels of the casing have been mounted.
7. Check whether the set is set up securely.
8. Check whether the drain valve below the pump housing is closed.
9. Check whether all connections of suction and delivery lines are tightened securely.
WARNING
Hot oil and components can cause personal injury. Do not allow hot oil or hot
components to contact the skin.
15