Prepare The Work - Hanmey Implements AGL Series Operation, Service & Parts Manual

P W :
REPARE THE ORK
- Before and when working, do not drink alcohol, take drugs, or any
other substances which may alter your capability of working with
machine tools.
- Be sure to have sufficient fuel, to prevent a forced stopping of the
machine, maybe during a critical movement.
- Do not use the equipment under unsafe conditions. For instance, it
is forbidden to execute makeshift repair activities just to start
working; it is forbidden to work at night with an insufficiently
illuminated working area.
- NEVER operate implement without all shields in place and in good
operational condition. The operator must be familiar with the mower and
tractor and all associated safety practices before operating the mower and
tractor.
W
HEN WORKING OR DURING THE MAINTENANCE ACTIVITIES IT IS NECESSARY TO
:
REMEMBER
- The labels and stickers providing instructions and pointing out the
dangers, must not be removed, hidden, or made illegible.
- Do not remove, except in case of maintenance, the shields, guards, and
deflectors equipped on the mower. When it is necessary to remove them,
stop engine, handle with care and reassemble them properly before
restarting the engine and using the equipment. The mower is equipped
with protective deflectors to prevent objects being thrown from the
mower by the blades, however, no shielding is 100% effective. All
shields, guards, and deflectors equipped on the mower must be
maintained in good operational condition.
- It is forbidden to lubricate, clean and adjust the moving parts while they are
running.
- During maintenance or adjustment activities on the equipment it is
forbidden to use hands for executing operations for which there are
specific tools.
- Do not use tools in bad condition or inappropriately, for instance pliers
Ha
H a n m e y I m p l e m e n t s 9