Maintenance; General Maintenance - Hanmey Implements AGL Series Operation, Service & Parts Manual

MAINTENANCE

Maintenance is a fundamental operation to extend life and performances of any
agricultural vehicle; taking care of the machine grants you not only a good work
execution, but also a longer life of the whole equipment and a greater safety on the
workplace.
The operating times indicated in this manual have just an informative character and
are referred to normal conditions of use; they can thus undergo variations according to
the type of service.
Ha
MAINTENANCE
Before injecting lubricating grease
into the zerks, clean them
accurately to prevent mud, dust, or
other foreign matters from mixing
up with grease, thus diminishing
the lubrication effect.
- When adding or changing oil,
it is better to use the same oil
type, in order to avoid mixing
oils with different features.
- Before executing maintenance
activities on the machine, stop
engine, disengage power takeoff, set
parking brake and place the
equipment on the ground in
horzontal position.
- After the first working hours, check
that all bolts and nuts are tightened;
remember also to check often all the
machine safety guards.
H a n m e y I m p l e m e n t s 18