Drive Belt Adjustment - Hanmey Implements AGL Series Operation, Service & Parts Manual

DRIVE BELT ADJUSTMENT

Loosen the Screw A and B that locks the support shaft and loosen the counter nut C.
Loosen the screws that lock the gear box on the mounting plate D.
Adjust the drive belt tension. The correct belt tension is achieved when the belt
can be deflected by the belt thickness about 10mm at the center point between the
pulleys.
Align the gearbox so the drive shaft is parallel with the body.
Use a straight edge to make sure the belt pullies are inline and running true. If
misaligned, call your dealer or service agent for technical support.
Fit the safety covers and tighten the mounting bolts before operation.
Ha
SET UP
Approx.10mm
Deflection
Align with a
Straight Edge
H a n m e y I m p l e m e n t s 15