Operating Instructions - FERREX 25CC User Manual

Operation/Operating Instructions Kapitelüberschrift
SWITCHING OFF THE ENGINE
Emergency Stop procedure:
To stop the engine in an emergency, activate the Hand Guard / Chain Brake Lever
(Fig.6/pos. 3). This will immediately stop the chain. Then switch the stop switch (Fig.
8/pos. 15) to '0' Stop.
Normal procedure:
Let go of the throttle lever (Fig. 11/pos. 18) and wait until the engine has changed to
idling speed. Then set the I/STOP-switch (Fig. 11/pos.19) to '0' Stop.
Practice all the work steps with the engine switched off before you start to use the
equipment.
m CAUTION
When idling, the chain (1) should not move. If the chain (1) moves, you need to adjust
the idling speed!

Operating Instructions

m Important instructions
This chainsaw is a special type of saw that is specially designed for tree care and tree
surgery.
This chainsaw may only be operated one-handed with corresponding training and if
a carefully specified working technique is applied.
For all other applications, the chainsaw must be operated with both hands like in the
case of conventional chainsaws.
m Important notices
Exclusively use the device for sawing wood. Do not work on metal, plastic, masonry
and building materials which are not made of wood.
Turn off the motor if the saw comes in contact with foreign objects. Check the saw
and, if applicable, repair it.
Protect the chain from dirt and sand. Even small quantities of dirt can quickly make
the chain blunt and increase the risk of kickback.
Start by cutting up smaller logs to practise in order to get a feel for the device, before
attempting difficult tasks.
Activate the throttle at maximum, before starting sawing.
31