Icom IC-M502A Instruction Manual page 25

D D Normal call
The nature of the Distress call should be included in the Dis-
tress call.
q Push
[ ] to enter the DSC menu.
[ ]
DSC/ENT DSC/ENT
w Rotate
[ ] to select "
[ ]
CHANNEL CHANNEL
[ ] .
[ ]
DSC/ENT
DSC/ENT
e Rotate
[ ] to select the nature of the distress,
[ ]
CHANNEL CHANNEL
push [ ] .
[ ]
DSC/ENT DSC/ENT
• 'Undesignated,' 'Explosion,' 'Flooding,' 'Collision,' 'Grounding,'
'Capsizing,' 'Sinking,' 'Adrift (Disable adrift),' 'Abandoning (Aban-
doning ship),' 'Piracy (Piracy attack)' and 'MOB (Man overboard)'
are available.
• The selected nature of the distress is stored for 10 minutes after
programming is finished.
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y. (next page)
r The position information appears. Set the current posi-
tion, push
," push
• Edit the digit of your position data by using
- Push [
[ CH/WX] CH/WX
- After editing latitude data, select " "; North latitude or " ";
South latitude.
- After editing longitude data, select " "; East longitude or " ";
West longitude.
- Push [ [
HI/LO
HI/LO
t The time information appears. Set the current UTC time,
push [
[
DSC/ENT
DSC/ENT
• Edit the digit of the current UTC time by using
- Push [ [ CH/WX]
CH/WX
- Push [
[
HI/LO
HI/LO
DSC OPERATION
[ ] .
[ ]
DSC/ENT
DSC/ENT
] or [ ] for cursor movement.
[ SCAN ]
SCAN
] ] to clear the position data.
] .
]
] or [ [ ] for cursor movement. ]
SCAN
SCAN
] to clear the time data.
]
6
6
[ ] .
[ ]
CHANNEL CHANNEL
[ ] .
[ ]
CHANNEL CHANNEL
19